DIY AAM throttle body spacer install - - Infiniti G35 & G37 Forum Discussion | setemail.ru
Show Your Support Become A Premier Member

    > > >
  • Reload this Page >
    • DIY AAM throttle body spacer install


Intake & Exhaust Questions and info regarding various aftermatket exhaust systems for the G35 (Headers,Y-Pipes, and Cat-Back Systems)

DIY AAM throttle body spacer install

Thread Tools Rate Thread
Old 11-01-2010, 12:19 PM
Andrei's Avatar
Registered User
Thread Starter
iTrader: (12)
Join Date: Jan 2008
location: Lawrenceville, GA
Posts: 2,771
Thanked 19 Times in 16 Posts
DIY AAM throttle body spacer install

I had this spacer for over 2 years and didn't install it and it cost me close to $100 when I bought it. The bolts are a little longer then they should be and it's okay because I do plan on getting a 90mm throttle body to try out and it needs an intake manifold adapter while also using the spacer.
It has 3 vacuum ports and now with the EVAP system removed I have a total of 4 vacuum ports.

I did however have to cut one of the bolts to make it shorter because the plenum has no exit for the bolt to extend out.

There are probably no gains or maybe less than 1 HP. Maybe it brings down intake temps.











Last edited by Andrei; 11-01-2010 at 04:13 PM.
Old 11-03-2010, 08:22 AM
Registered User
iTrader: (2)
Join Date: Sep 2010
location: Tampa, FL
Posts: 124
Thanks: 0
Thanked 0 Times in 0 Posts
I know absoloutly nothing about TB Spacers...

Has anyone ever gotten anything other than looks with these things? Any gain? Sound? What is the reason for putting one of these on?
Old 11-03-2010, 11:25 AM
Registered User
iTrader: (3)
Join Date: Mar 2009
Posts: 131
Thanks: 0
Thanked 3 Times in 3 Posts
Some people do see gains on the butt dyno some don't I haven't tried it out myself yet...
Old 11-03-2010, 01:56 PM
Andrei's Avatar
Registered User
Thread Starter
iTrader: (12)
Join Date: Jan 2008
location: Lawrenceville, GA
Posts: 2,771
Thanked 19 Times in 16 Posts
To be honest. Yes I did feel a difference in power. I'm very sensitive when it comes to any kind of differences in performance from the car and I did notice a difference.

Either way it also keeps the throttle body separate from the heat of the upper plenum. That's got to be good for something since air is now colder all the way to the inlet of the plenum instead of the inlet on the TB. By the time the cold air travels through the plenum from the inlet, it gets sucked down too fast to have time to warm up. That's just a theory but it does make sense.

Last edited by Andrei; 11-03-2010 at 02:01 PM.
Old 11-04-2010, 06:54 PM
Registered User
iTrader: (4)
Join Date: Feb 2009
Posts: 192
Thanks: 0
Thanked 0 Times in 0 Posts
Lower intake temp is true but I dont think it gains enough HP for us to feel the difference. Motordyne 5/16" or 1/2" Copper Iso Thermal is way better. Gain noticeable power and lower intake temp.
Old 11-04-2010, 07:08 PM
Registered User
iTrader: (2)
Join Date: Oct 2009
location: Sterling, Virginia
Posts: 1,656
Thanks: 0
Thanked 1 Time in 1 Post
+1^^
Old 11-08-2010, 11:38 AM
B T's Avatar
B T B T is offline
Registered User
iTrader: (1)
Join Date: Apr 2009
location: Mobile, AL
Posts: 358
Thanked 7 Times in 7 Posts
I'm trying to do some research on these TB's, do you have any pics of the butterly valve?
Old 02-15-2011, 03:20 AM
Registered User
Join Date: Dec 2010
location: Visalia CA
Posts: 29
Thanks: 0
Thanked 0 Times in 0 Posts
I actually have a obx tb spacer installed on my G the only noticeable thing was the cool sounds it gives off. Sounds almost like a tiny supercharger lol. I had a question though. I was plaining on later installing a MD 5/16 plenum spacer for more performance. Has anyone had experience with both tb and plenum spacers on their car? should I remove the tb and just have the plenum only? can someone help?
Old 02-17-2011, 05:19 PM
Registered User
iTrader: (9)
Join Date: Oct 2008
location: ROSEVILLE/Sacramento
Posts: 572
Thanked 0 Times in 0 Posts
thats a good question b2thag
Old 02-18-2011, 02:20 AM
re-crue13's Avatar
Registered User
iTrader: (4)
Join Date: Jul 2010
location: Western Colorado
Posts: 760
Thanked 36 Times in 32 Posts
theres a few members running them, OCG35 is one http://setemail.ru/forums/reviews...er-review.html

Last edited by re-crue13; 02-18-2011 at 02:29 AM.
Old 02-18-2011, 08:12 PM
gary c's Avatar
SLICK
iTrader: (10)
Join Date: Feb 2005
location: Valencia, Ca
Posts: 19,092
Thanked 1,060 Times in 944 Posts
Quote:
Originally Posted by lovemyg88 View Post
Lower intake temp is true but I don't think it gains enough HP for us to feel the difference. Motordyne 5/16" or 1/2" Copper ISO Thermal is way better. Gain noticeable power and lower intake temp.
I've had my TBS since '06 and the most noticeable difference is the transition between gears with the 5AT, quicker smoother shifts. I've also had my MotorDyne 1/2" spacer ISO that long, it is the best bang for your $$!

Quote:
Originally Posted by B2thaG View Post
I actually have a obx TB spacer installed on my G the only noticeable thing was the cool sounds it gives off. Sounds almost like a tiny supercharger lol. I had a question though. I was plaining on later installing a MD 5/16 plenum spacer for more performance. Has anyone had experience with both TB and plenum spacers on their car? should I remove the TB and just have the plenum only? can someone help?
Unless the OBX TBS has a fan inside I seriously doubt what you're hearing is the spacer. You can leave it in when you install the MotorDyne spacer, they're not in conflict.
Gary
Old 02-18-2011, 08:20 PM
Registered User
iTrader: (33)
Join Date: Nov 2004
location: OC - So Cal
Posts: 17,181
Thanked 146 Times in 104 Posts
Quote:
Originally Posted by re-crue13 View Post
theres a few members running them, OCG35 is one http://setemail.ru/forums/reviews...er-review.html
how did you find that>?... I deleted it after all the drama... now that I think about it, I might have asked ttrank to bring it back - cant remember

BTW I still have the tbs on the car and still recommend it - good luck finding one though.
Old 02-18-2011, 08:33 PM
re-crue13's Avatar
Registered User
iTrader: (4)
Join Date: Jul 2010
location: Western Colorado
Posts: 760
Thanked 36 Times in 32 Posts
Quote:
Originally Posted by OCG35 View Post
how did you find that>?... I deleted it after all the drama... now that I think about it, I might have asked ttrank to bring it back - cant remember

BTW I still have the tbs on the car and still recommend it - good luck finding one though.
Search
I just googled "G35 tb spacer" and the thread came up, when i cant find it on driver, I google and look for specific forums like 6mt, driver, nico club, etc.

Last edited by re-crue13; 02-18-2011 at 08:50 PM.
Old 02-18-2011, 08:38 PM
juan350gt's Avatar
Registered User
Join Date: Feb 2008
location: long beach
Posts: 1,314
Thanked 7 Times in 6 Posts
i have an OBX throttle body spacer you can hear it hissing and do feel a slight gain in power nothing too crazy..
Old 02-18-2011, 09:08 PM
Registered User
iTrader: (33)
Join Date: Nov 2004
location: OC - So Cal
Posts: 17,181
Thanked 146 Times in 104 Posts
Quote:
Originally Posted by re-crue13 View Post
Search
I just googled "G35 tb spacer" and the thread came up, when i cant find it on driver, I google and look for specific forums like 6mt, driver, nico club, etc.
right... but what I meant was, it shouldn't be viewable because I deleted the thread... only mods and admins can see the old deleted threads... but I think I may have asked ttrank to rekindle it a while back - otherwise I have no idea how its there... anyway, no biggie - aside from the drama its a good thread.

Related Topics
Thread Thread Starter Forum Replies Last Post
Car Wrap Vinyl - DIY 5ft x 50ft Roll - Matte Colors & Carbon Fiber Tolboothwilley™ Exterior-Vendor 6 07-28-2016 12:42 AM
G35 Speed Project G35VSHNG37 G35 Coupe V35 2003 - 07 17 10-25-2015 08:43 PM
Getting P1128 code - Throttle Control Motor Circuit Short Hasanbaloch Engine, Drivetrain & Forced-Induction 5 07-19-2015 02:13 PM
Am i that lean or is it something else quickspeed6 Engine, Drivetrain & Forced-Induction 24 07-15-2015 11:06 AM


Tags
350z, aam, body, copper, diy, dyno, g35, install, intake, iso, obx, plenum, review, spacer, tb, thermal, throttle
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 06:57 AM.

setemail.ru - Archive - - - - - Top

Copyright ©2002 - 2017, setemail.ru All Rights Reserved.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in:

Related pages


57xtremerust on rotors after raingrudge racing forumswhat does disp meanlease infiniti g35direction of slotted rotorshow much does it cost to paint a bumperconcave staggered wheelsxm radio previewyellow top optima battery2jz 6 speedpower steering rack leakingcobalt blue mustanginfiniti fx35 wheel bearingg35 transmission fluid changehow to fix sticking brake calipernitto nt55supercharger vs turbomiata tire calcacura cl type s 6 speed transmission for salevrc13 wheelsinfiniti i30 forumruff racing 2782005 nissan 350z exhaustsickest picsvrp tire dressingstillen g35 exhaustwill 5x112 fit 5x114how to make projector headlightspilot bearing removal tipshow much to charge for car detailinginsurance on 350zinfiniti g 45 sedanheadlight vinylstate farm catastrophe claimswhy does my car shake at 60 mphinfiniti dealer albany nyfosgate t1chrome trims for carsgold xxr4.3 stroker44k gas treatmentplasti dip rims while on carcustom g35 headlightsprodrive gc-06hg36 coupecurt mfg trailer hitchnexen n5000 tires reviewdog car hammock diywhich borla muffler is the loudestcustom rx7 for salewhat causes a knock sensor to go badthrow out bearing symptomsl5 solo baric 10ways to increase horsepowertakata 5 point harnessbuilt vq35decarzone auto repairbrightest reverse lightsjdm offset wheelsleaking valve cover gasket symptomscheap caliper coversthrottle chamberenkei rpf1 bluewindshield wiper blade size chart2004 infiniti g35 radiator350z build350z engine dress upminnesota window tint lawmassapequa infinitywhere to buy leatheriquejim wolf technology